Our method

How we choose

Drynook is an editorial guide, not a test lab. This is how we decide what to recommend, and what we will not do.

Last updated

The questions we ask, in order

  1. What is the problem? Condensation, damp coming in from outside, a leak, or laundry drying indoors. A dehumidifier only helps with some of these.
  2. How humid is it? We point you to a hygrometer before a dehumidifier.
  3. How warm is the room? This matters most when choosing between compressor and desiccant dehumidifiers.
  4. How big is the space, and how much water goes into the air?
  5. Then noise and running cost.

Where our facts come from

Every figure in a comparison table comes from a named source, and each guide lists its sources with the date we checked them. If we cannot source a figure, we leave it out or say that the maker does not publish it.

What "our pick" means

A pick is the machine whose published figures best fit a stated job, such as a heated home with washing drying indoors or a cold spare room. We compare what each maker says its machine removes at ordinary room conditions, the power it draws to do it, the noise on its quietest setting, the tank, the warranty and what the manual warns against. It is a judgement from the paperwork, not a test result, and every pick says so. If a maker does not publish the figure we need, its machine cannot be a pick.

What we do not do

Running costs

We work out running costs as kWh × unit rate, using the rated power from the spec sheet. For Great Britain the default is 26.32p/kWh, the Ofgem price cap average for 1 October to 31 December 2026. For Ireland we use SEAI's average of 37.0c/kWh as a rough guide. We leave out standing charges, because you pay them whether an appliance is on or not. When the price cap changes, we update the default and its date.

Running-cost calculator

Work out what an appliance costs to run. Use the rated power from the spec sheet, or the figure from a plug-in energy monitor if you have one.

Electricity price
Per hour
Per day
For 30 days

Enter a power figure in watts to see a cost.

Formula: kWh = watts × hours ÷ 1,000, then cost = kWh × unit rate.

GB: 26.32p/kWh for 1 October to 31 December 2026. Average unit rate across England, Scotland and Wales for a standard variable tariff paid by Direct Debit. Your own rate depends on your region, supplier and tariff: it is on your bill. Source: Ofgem, checked 16 November 2026.

Ireland: 37.0c/kWh for January to June 2026. SEAI effective unit price for household electricity, all taxes included, weighted across all suppliers: what households paid in total divided by the electricity they used. It is not the unit rate on a bill, so treat results as a rough guide and use the unit rate on your own bill for a closer figure. Source: SEAI, checked 16 November 2026.

We do not add the standing charge (54.83p a day in GB for 1 October to 31 December 2026): you pay it whether the machine is on or not. A maker's power figure is measured in set conditions; real running time depends on the room and the humidity setting.

Keeping pages up to date

Every guide shows the date it was last checked. We recheck facts when prices change or a model is replaced, and we mark models that are discontinued.

How we make money

Links to shops can be affiliate links. They are always marked Ad. See our advertising disclosure.

Corrections

Spotted a mistake? Email partners@tsmaffiliates.com and we will check it and correct it.