Buying guide
Best hygrometers for a UK home: measure before you buy a dehumidifier
What a cheap digital hygrometer tells you about damp, what to look for, where to put it, and two models whose accuracy the maker publishes.
Checked and updated
On this page (10 sections)
Our pick is the SwitchBot Meter Plus: of the sensors we could check, it is the one whose maker states its humidity accuracy and the range it applies to. Whatever you buy, get a digital hygrometer that shows humidity and temperature, with a display you can read across the room and, ideally, a record of the day’s highs and lows. Put it in the room that worries you, away from the window, radiator and kettle, and watch it for a week before deciding whether you need a dehumidifier. A cheap sensor is a guide, not a laboratory instrument; patterns matter more than a single number.
External sources were checked on 16 November 2026. We have not tested these sensors. Accuracy figures are the manufacturer’s own and we name a product only where the maker publishes its specifications.
Our picks
Chosen from the makers' published specifications and manuals, not from hands-on tests: we have not tested these products. How we choose
Why measure first
A wet window in the morning tells you the glass is cold and the air is moist. It does not tell you whether the bedroom is humid all night, whether it is only the hour after a shower, or whether a wall is damp for a different reason. A hygrometer, also called a humidity meter, turns “it feels damp” into readings you can compare from day to day.
CSE puts it simply: use a humidity meter “to find out which rooms need to be ventilated regularly”, and notes that they can be bought cheaply and used to show what makes humidity rise (CSE, damp and condensation, reviewed December 2025). That is the job here. A sensor will not diagnose a leak or tell you who should fix a wall; it gives you evidence for the next decision, and for a conversation with a landlord if you rent.
What the number means
Relative humidity (RH) is how much water vapour the air holds compared with the most it could hold at that temperature. The same amount of moisture gives a higher RH in a colder room, which is one reason cold bedrooms run wet.
CSE says to keep RH in the home between 40 and 60%, and that “there is a risk of mould growth when RH goes above 60%” (CSE, damp and condensation). Its separate guide to testing humidity at home, reviewed August 2026, gives the same aim of 40 to 60%.
Read that range as a guide, not a pass mark. A reading of 65% while the shower runs is expected; a bedroom that sits above 60% for most of every night is different. A reading inside the range does not prove a wall has no damp problem.
Features that matter
- Humidity and temperature together. You need both, because RH depends on temperature and a cold room is part of the story.
- A display you can read. Large digits you can see from the bed or the doorway mean you will actually look at it.
- High and low records. A min/max memory lets you see the overnight peak without getting up at 4 a.m. CSE notes that most monitors do not store information, so without this you need to write readings down.
- A published accuracy figure, with its range. Look for something like “±2% RH between 10 and 90% RH”, and notice where the tolerance widens. A figure without a range or conditions tells you less.
- Optional: an app and a history graph. Useful if you want a week of data without writing it down, or a chart to send a landlord. Not essential.
Skip “comfort” faces and colour bands as a buying reason. They are a manufacturer’s own thresholds and may not match the 40 to 60% range above.
Two models with published specifications
We have named only models whose maker publishes humidity accuracy on its own website. Other brands sold in the UK, including TempPro (formerly ThermoPro), Inkbird and ETI, may be equally good, but we could not load their product pages to confirm specifications when we checked, so they are not listed yet.
| Model | Humidity accuracy | Temperature accuracy | Display | Battery | App and data |
|---|---|---|---|---|---|
| SwitchBot Meter Plus | ±2% RH from 10 to 90% RH; ±4% outside that | ±0.2°C from 0 to 65°C | 3-inch LCD | 2 x AAA, about a year (maker) | Bluetooth app, 68-day graphs, data export; two years with a SwitchBot Hub |
| Govee H5075 | ±3% RH (no range stated) | ±0.32°C | LCD with large numbers | 2 x AAA, about six months (UK and US pages) | Govee Home app, 20 days of records, CSV export |
Figures are the makers' own, from the sources listed with each product below; we have not measured them.
The Govee’s battery line follows its UK and US pages; its EU specification table says “battery-free”.
Sources: SwitchBot Meter Plus official page and UK store listing; Govee H5075 official pages, UK, US and EU. All checked on 16 November 2026.
SwitchBot Meter Plus
The clearest published accuracy of the models we could check, with the range it applies to and a wider tolerance stated at the very dry and very humid ends. The app keeps 68 days of graphs and lets you export the data, which is handy if you want a record to show a landlord. SwitchBot runs a UK store. Its basic SwitchBot Meter is a different model, and we could not find a humidity accuracy figure for it on the maker’s page.
Skip it if you do not want an app at all; the screen alone works, but the history is where it earns its place. We did not find a min/max memory on the device described on the maker’s page.
Govee H5075
A similar Bluetooth sensor with a large display and a 20-day record in the Govee Home app. Govee sells it through its own UK online store, which lists the H5075 with prices in pounds (checked 16 November 2026; we have not checked stock). Govee’s pages are less tidy: the UK and US pages give ±3% RH without saying over what range, and say the H5075 runs on two AAA batteries for about six months, while the EU specification table lists it as “battery-free”. The UK and US pages also give two different Bluetooth ranges, 60 m in the product description and 50 m in the FAQ.
Because Govee gives ±3% RH without saying over what range, SwitchBot’s published accuracy is easier to trust. Check the listing’s exact model number before buying.
Where to put it
We could not find official UK guidance on hygrometer placement, so this is practical advice rather than a standard. Put the sensor where it measures the room’s air, not one surface:
- on a shelf, chest of drawers or bedside table, roughly at the height you breathe when you are in the room
- away from the window and its cold sill, which will read high
- away from radiators, heaters, the kettle and direct sunlight
- not in the bathroom while you shower, unless that is what you want to measure
- in the same place every day, so you are comparing days rather than positions
CSE suggests taking readings in bedrooms when you wake up, in the kitchen during and after cooking, and in bathrooms after a bath or shower (CSE, testing humidity). If you have one sensor, start with the room that has the mould or the wet window.
A week of readings
Note the reading when you wake and in the early evening, and add a word about what was happening: washing drying, heating off, window open, shower. If the sensor keeps highs and lows or a history, check those too. After a week, look for a pattern:
- High most nights, falling after you ventilate, rising again with laundry. Moisture is building up faster than the room loses it. Work through the condensation checklist first; if readings stay high, a dehumidifier is worth considering.
- Spikes only after showers or cooking, then back in range. Ventilation at the source matters more than a machine. Check the extractor works.
- In range most of the time, but mould keeps coming back in one spot. That points towards a cold spot or a building fault. See black mould in the bedroom and report it if you rent.
- High and the room is cold. Temperature is part of the problem. A compressor dehumidifier struggles in cold rooms; see compressor vs desiccant.
Checking a cheap sensor
Two sensors side by side often disagree by a few per cent, which is within their stated tolerances. If you own two, put them together for an hour before deciding which room is worse. TempPro’s calibration guide describes the salt test: a sealed bag with damp salt should settle at about 75% humidity after 12 hours, and a sensor with an adjustment dial can be set to that. Many digital sensors have no adjustment, so treat the test as a check, not a fix. For a calibrated measurement, ETI offers UKAS calibration for hygrometers; a household does not usually need it.
Once you have the numbers
If the readings show a room staying humid, our dehumidifier buying guide is the next step, and how to size a dehumidifier explains why the readings matter more than the litres-per-day label.
How we chose
We listed the features that help a household decide whether it has a humidity problem, then named only models whose makers publish humidity accuracy and features on their own sites. We have not tested any sensor, and the accuracy figures are the manufacturers’ claims.
Sources checked on 16 November 2026
- CSE: damp and condensation, reviewed December 2025
- CSE: testing the air quality, temperature and humidity of your home, reviewed August 2026
- SwitchBot Meter Plus official page and UK store
- SwitchBot Meter official page
- Govee H5075 official page (UK store), (US) and (EU)
- TempPro: how to calibrate a hygrometer
- ETI: humidity calibration
The products in this guide
SwitchBot
SwitchBot Meter Plus
Suits: Most homes: a readable screen now, a history graph if you want one
- Humidity accuracy
- ±2% RH from 10 to 90% RH; ±4% outside that
- Temperature accuracy
- ±0.2°C from 0 to 65°C
- Display
- 3-inch LCD
- Battery
- 2 x AAA, about a year (maker)
- App and data
- Bluetooth app, 68-day graphs, data export; two years with a SwitchBot Hub
Good for
- The maker states its humidity accuracy and the range it applies to
- 68 days of graphs in the app, with data export
Watch out for
- No min/max memory on the device that we could find on the maker's page
- The history needs the app
Specs from SwitchBot product page (checked 16 November 2026) ; SwitchBot UK store (checked 16 November 2026) .
Govee
Govee H5075
Suits: A large display and app history, if you can live with looser paperwork
- Humidity accuracy
- ±3% RH (no range stated)
- Temperature accuracy
- ±0.32°C
- Display
- LCD with large numbers
- Battery
- 2 x AAA, about six months (UK and US pages)
- App and data
- Govee Home app, 20 days of records, CSV export
Good for
- Large-number display and a 20-day record in the app
- Sold through Govee's own UK store
Watch out for
- Gives ±3% RH without saying over what range
- Govee's own pages disagree on battery and Bluetooth range
Specs from Govee UK product page (checked 16 November 2026) ; Govee US product page (checked 16 November 2026) ; Govee EU product page (checked 16 November 2026) .