Comparison

MeacoDry Arete One vs Arete Two: what is the difference, and which should you buy?

Arete One or Arete Two? Meaco's own figures side by side: app, louvre, fan speeds, noise, water removed per watt, wall mounting and warranty, size by size.

By Checked and updated

On this page (9 sections)

Size for size, the Arete One and Arete Two remove almost exactly the same water: the 20L of each is listed at 8.5 litres a day at 20°C and 60% humidity. What the Two adds is a DC motor with a third, faster fan speed (used by its laundry mode), a louvre, timers, a newer display and the Meaco app, and it draws a little less power for the same water. Buy the Arete Two 20L for a heated family home where washing dries indoors, and the Arete Two 10L for a one-bed flat. Buy the Arete One 6L for a single bedroom, or any Arete One if you want the simplest machine with no app.

This is based on Meaco’s published figures and manuals, checked on 16 November 2026, and on dated independent reviews. Drynook has not tested either range.

What Meaco sells now

Meaco’s AdArete collection page lists nine machines:

That matches Meaco’s own AdArete One versus Arete Two article (last updated 20 January 2026). So four sizes exist in both ranges, and only the Arete One comes as a 6L. The Arete One comes in Warm Pebble or Charcoal; Meaco says “The Arete® Two comes exclusively in Charcoal.”

As with every dehumidifier, the “20L” in the name is what it removes at 30°C and 80% humidity, far wetter than a British living room. Compare the 20°C figure in the table further down. How to size a dehumidifier explains why.

Feature by feature

Every row comes from the model’s own product page or manual, not Meaco’s comparison widget.

Feature Arete One Arete Two
Type Compressor, 5-35°C Compressor, 5-35°C
Motor AC, every size DC, every size
Fan speeds Two Three
Top airflow 6L 65 m³/h; 10L and 12L 100; 20L 160; 25L 175 10L and 12L 140 m³/h; 20L and 25L 255
Laundry mode Yes: 35% target, high fan, 6 hours Yes: 35% target, high (third) fan, 6 hours, adjustable
Timers None listed On and off timers; laundry timer up to 24 hours
App and Wi-Fi No Meaco app, 2.4 and 5 GHz Wi-Fi, Alexa and Google Assistant
Louvre No Manual louvre
Display Digital display LCD “Chase” display with WET and optimum-humidity indicators
Filters Washable dust filter, H13 HEPA included, charcoal optional Same
Night mode Lights and beeps off, fan to low Same, and the tank-full alarm stays silent
Noise by fan speed (manuals) 10L/12L 35 and 38 dB(A); 20L 38 and 40; 25L 40 and 42 10L/12L 35, 38, 44 dB; 20L 38, 40, 50; 25L 40, 42, 50
Wall mounting 6L, 10L and 12L pages say yes; 20L and 25L no 10L and 12L yes; 20L and 25L no
Warranty Five years if registered Five years if registered

The Arete One 6L manual gives 32 to 35 dB, and its page says “from 32 dB”. On wall mounting, the brackets are sold separately, and the only bracket Meaco lists says it is “Suitable for Arete® 10 and 12L models”, so ask Meaco before planning to hang a 6L.

Sources: Arete One Ad6L, Ad10L, Ad12L, Ad20L and Ad25L pages; Arete Two Ad10L, Ad12L, Ad20L and Ad25L pages; the Arete One 10L/12L manual and 20L/25L manual; the Arete Two 10L/12L manual and 20L/25L manual; and Meaco’s Adcomparison article for timers, display and colours.

Size for size: the figures

Each row is from the model’s own water-removal table at 20°C and 60% humidity, with the power Meaco gives for that same row. The last column is watts divided by litres a day: lower means less electricity for the same water.

Model Water a day at 20°C, 60% RH Power at that point Watts per litre a day Tank Weight (page) Noise from
Arete One 6L 2.63 L 101 W 38.4 1.8 L 8 kg 32 dB
Arete One 10L 4.34 L 151 W 34.8 2.5 L 11.3 kg 35 dB
Arete Two 10L 4.19 L 136 W 32.5 2.5 L 11 kg 35 dB
Arete One 12L 5.23 L 151 W 28.9 2.5 L 11.5 kg 35 dB
Arete Two 12L 5.40 L 136 W 25.2 2.5 L 11.3 kg 35 dB
Arete One 20L 8.5 L 216 W 25.4 4.8 L 15.2 kg 38 dB
Arete Two 20L 8.50 L 207 W 24.4 4.8 L 15.4 kg 38 dB
Arete One 25L 10.73 L 267 W 24.9 4.8 L 16.2 kg 40 dB
Arete Two 25L 10.85 L 250 W 23.0 4.8 L 16.1 kg 40 dB

The sum for the 20L pair: 216 ÷ 8.5 = 25.4 watts per litre a day for the One, and 207 ÷ 8.50 = 24.4 for the Two. Run either for a full day at that point and it is 216 × 24 = 5.184 kWh for 8.5 litres (0.61 kWh a litre) against 207 × 24 = 4.968 kWh (0.58 kWh a litre). About 4% less electricity for the same water.

The manuals give slightly lower weights than the pages (for example 15 kg for the One 20L and 15.1 kg for the Two 20L) and different “nominal” power figures, measured at other conditions. The table keeps to one page per model so the rows compare like with like.

What the Arete Two actually buys you

The same water, slightly less electricity. In every shared size the Two draws less power at 20°C and 60% humidity, by 9 to 17 watts. Water removed is within a few per cent either way: the One 10L is listed fractionally higher than the Two 10L, the Two is fractionally higher at 12L and 25L, and the 20Ls are identical. That is a small saving, not a reason on its own.

A faster laundry fan, but no drying-time figure. Both ranges’ laundry modes aim for 35% humidity on the high fan for six hours. On the Two, high is a third speed: 140 m³/h on the 10L and 12L against 100 for the One, and 255 m³/h on the 20L and 25L against 160. Meaco says the Two’s DC motor “can move up to 60% more air than the Arete® One”, and that “the additional third fan speed helps speed up drying times even further”. It publishes no drying times for either range, so the figures show more air over the washing, not a measured saving in hours. The louvre lets you aim that air at the clothes horse. See drying clothes indoors.

Not quieter on low, by Meaco’s figures. The low fan figures are identical size for size: 35 dB on the 10L and 12L, 38 on the 20L, 40 on the 25L. The Two’s medium matches the One’s high, and its new top speed is louder: 44 dB on the 10L and 12L, 50 on the 20L and 25L. Night mode drops either range to low. For a bedroom, see the quiet dehumidifier guide.

An app, if you want one. The Two connects to the Meaco app for remote control and schedules, plus Alexa and Google Assistant. All the main controls are also on the machine. Worth it if you want the machine on a schedule or running before you get home; not if you will set it once and leave it.

What independent reviewers said:

Running costs

Use the 20°C wattage, because that is closest to a heated British room. For eight hours of continuous running at the Ofgem average of 26.32p/kWh (1 October to 31 December 2026):

These are upper figures for that schedule: both ranges switch the compressor off when they reach the humidity you set. The difference between the two 20Ls is a few pence a month at most. The calculator below this article lets you pick any of these models and enter your own rate and hours, and the running-cost guide explains the sum.

Which to buy

One bedroom. The Arete One 6L. It is the only 6L in either range, draws 101 W, starts at 32 dB, and its night mode turns off the lights and beeps. At 2.63 litres a day at 20°C it is a one-room machine, so do not stretch it to a whole flat.

AdMeacoDry Arete One 6L

A one-bed flat. The Arete Two 10L: 4.19 litres a day at 20°C on 136 W, wall-mountable, with the louvre for an airer in the living room. If the flat is damp or you dry a lot of washing, the Two 12L is listed at 5.40 litres for the same 136 W, in the same size of case.

A family house with washing drying indoors. The Arete Two 20L. It removes the same 8.5 litres a day at 20°C as the Arete One 20L, on less power, and its laundry mode uses a fan speed with 59% more airflow (255 against 160 m³/h). The 4.8 litre tank and the louvre suit a weekly clothes horse. Only go to a 25L for a large or very damp house: it adds about a quarter more water for a fifth more power.

AdMeacoDry Arete Two 20L

You want app control. Any Arete Two. The Arete One has no Wi-Fi in any size.

You want the simplest machine. An Arete One in the size you need: two fan speeds, a digital display, laundry and night modes, and nothing to connect. You give up the louvre, timers and the faster laundry fan, and use a little more power for the same water. Our buying guide covers sizes and other brands, and the Arete versus DD8L comparison covers cold rooms, where neither Arete is the right tool.

Warranty and registration

Both ranges have the same cover. AdMeaco’s warranty terms list “5 years on MeacoDry Arete®” and add: “The Warranty must be activated by registering online at www.meaco.com/warranty-register”. Register when you unpack it and keep the receipt.

Clause 6 limits where Meaco will honour it: “Meaco cannot provide Warranty service to products located outside mainland Great Britain. The only exception to this is if we ship the product offshore as part of the initial sale.” If you live in Northern Ireland, on a Scottish island or in the Republic of Ireland, ask the seller what cover you get before buying.

One more thing to know: clause 4 says the coverage period ends no later than two years after delivery unless an official Meaco extended warranty was bought, which sits awkwardly beside the five-year line for the Arete. If the full five years matters to you, ask Meaco to confirm it when you register. Clause 8 adds that if a machine with more than two years’ cover cannot be repaired after its second year, the replacement may be “a pre-owned product of a similar age or newer”.

Questions people ask

Is the Arete Two worth the extra over the Arete One?

If you dry washing indoors or want app control, yes. Size for size the Two removes about the same water, on 9 to 17 W less power at 20°C and 60% humidity by Meaco’s figures, and adds a faster laundry fan, a louvre, timers and the app. If you only need a dehumidifier switched on and left in a heated room, the Arete One does the same core job.

Is the Arete Two quieter?

Not on low, by Meaco’s manuals: both ranges are 35 dB on the 10L and 12L, 38 dB on the 20L and 40 dB on the 25L at the lowest fan speed. The Two’s extra top speed is louder, reaching 44 dB on the 10L and 12L and 50 dB on the 20L and 25L. Expert Reviews found the Arete Two 20L quieter than the Arete One in its own test.

What replaced the Arete One?

Nothing yet: Meaco still lists all five Arete One sizes, 6L, 10L, 12L, 20L and 25L, alongside the newer Arete Two. The Two is a separate range with the same case sizes, a DC motor and app control, and it does not come as a 6L.

Can both be wall mounted?

Only the smaller sizes. Meaco’s pages say the 10L and 12L of both ranges can be wall mounted, with the bracket sold separately; the 20L and 25L cannot. The Arete One 6L page also says yes, but Meaco’s bracket is listed as suitable for the 10 and 12L models, so check with Meaco first.

Do both have a HEPA filter?

Yes. Meaco’s comparison article says both ranges include H13 HEPA filtration and a standard dust filter, with an optional charcoal filter. Both manuals say removing the HEPA filter lowers the noise by 4 to 5 decibels.

Sources checked on 16 November 2026

Running-cost calculator

Work out what an appliance costs to run. Use the rated power from the spec sheet, or the figure from a plug-in energy monitor if you have one.

Electricity price
Per hour
£0.03
Per day
£0.21
For 30 days
£6.38

101 W × 8 h ÷ 1,000 = 0.808 kWh × 26.32p = £0.21 a day

Formula: kWh = watts × hours ÷ 1,000, then cost = kWh × unit rate.

GB: 26.32p/kWh for 1 October to 31 December 2026. Average unit rate across England, Scotland and Wales for a standard variable tariff paid by Direct Debit. Your own rate depends on your region, supplier and tariff: it is on your bill. Source: Ofgem, checked 16 November 2026.

Ireland: 37.0c/kWh for January to June 2026. SEAI effective unit price for household electricity, all taxes included, weighted across all suppliers: what households paid in total divided by the electricity they used. It is not the unit rate on a bill, so treat results as a rough guide and use the unit rate on your own bill for a closer figure. Source: SEAI, checked 16 November 2026.

We do not add the standing charge (54.83p a day in GB for 1 October to 31 December 2026): you pay it whether the machine is on or not. A maker's power figure is measured in set conditions; real running time depends on the room and the humidity setting.